THIS IS A REPRODUCTION PARTArticle code: v.nr.1808260497

CONTACT SWITCH MOUNTED IN DOOR JAMB TO OPERATE INTERIOR LAMP.Article code: v.nr.0008210252

Article code: v.nr.C82008B

Article code: v.nr.1215400031

Article code: v.nr.1215400030

Special Order Please allow two weeks for delivery.

Article code: v.nr.182006

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.Article code: v.nr.54-5512

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.Article code: v.nr.545936

WIRING HARNESS FOR HEADLIGHT BUCKET-PAIR. LHD MODELSPLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

PLEASE ALLOW 2 TO 3 WEEKS TO CUSTOM MAKE THIS HARNESS.

Article code: v.nr.072581025100

Article code: v.nr.0005450606

The iconic "Original" Battery Tender® Plus made trickle chargers a thing of the past and paved the way for smart battery chargers. This 12V, 1.25 AMP battery charger extends battery life for motorcycles, dirt bikes, ATVs, UTVs,  jet skis, lawnmowers, and more! With an industry-leading 10 year warranty, the Battery Tender® Plus is built to last. Unlike typical trickle chargers that can overcharge a battery and cause damage when connected for too long, our advanced charger and maintainer provides a full charge before switching to float mode to keep your battery at an optimal level.Included is a quick connect ring terminal harness for hard-to-reach areas and alligator clips for an alternate connection. Perfect for all lead-acid, flooded, or sealed maintenance-free batteries (AGM and gel cell). INCLUDES - 12V, 1.25 AMP battery charger with LED status light to show battery status- Fused ring terminal accessory cable for hard to reach batteries- Fused alligator clip accessory cable for an alternate connection - 10-year warranty and lifetime customer supportSPECIFICATIONS- Output: 12V @ 1.25 AMPs- Compatibility: lead-acid, AGM, and gel batteries- Dimensions: 4.87 x 3.25 x 2.93 inches, 1.45 lbs (charger only) - Reach: 10.5’ output cords and 18” alligator clip cable or 18” ring terminal cable COMPLETE 4-STEP CHARGING Smart charger technology assures the correct level of power is sent to the battery at all times.1. Initialization determines if the battery is connected correctly and battery’s charge level, composition 2.Bulk Charge brings the charge up with full charge and constant current 3. Absorption Mode slows the charging down until the battery reaches full charge4. Float/Maintenance Mode keeps the battery charged without overcharging or discharging SAFETY FIRST Battery Tender® battery chargers and maintainers are manufactured with built-in safety features like: - Spark proof connections (ring terminals and alligator clips) will not spark when touched together, the charger will not produce output voltage until it senses at least 3 volts from the battery - Reverse polarity protection ensures the charger will not charge unless the connections are attached correctly- Safety timer to shut off the charger after 72 hours of continuous useMeets agency approvals and safety standards from UL/CSA, FCC. California Residents WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov

The Battery Tender Junior is a fully automatic and Microprocessor controlled 12-Volt 750 mA battery charger that is CEC (California Energy Commission) compliant and able to be sold in California and Oregon under the new energy efficiency guidelines. Designed to bring a battery back up to a full state of charge and then maintain a battery at 100% indefinitely without the worry of typical trickle chargers that overcharge and burn up batteries. Will not overcharge a battery. Designed for use on Flooded, AGM, and Gel style lead acid batteries. The Battery Tender Junior is ideal for Motorcycles, ATVs, Watercraft, Scooters, and Lawn Mower or any battery up to 40-amp hour Spark Proof and Reverse polarity protection ensures safe use. Fully automatic and microprocessor controlled 5 year warranty Spark proof Reverse polarity protected Ideal for: motorcycles, cars, trucks, RV'S, lawn mowers, ATVS, and personal watercraft, designed for flooded, AGM, gel, and sealed maintenance free lead acid batteries Includes alligator clips and ring terminal quick disconnects

The Battery Tender® Junior High Efficiency (6V 1.25A) offers much more than a trickle charger could offer. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! This unit replaces both the 021-0127 (BT JR 6V, 0.75A) and 021-0144 (BT Plus 6, 1.25A) in all markets. Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Input: 120VAC, 60Hz Output: 6 Volts DC @ 1.25 Amp Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Solid state two color LED indicates stage of charger. Spark proof. Reverse polarity protected. 12' output cord. 5 year warranty Listed in California Appliance Efficiency Database Agency Approvals: UL/CSA/BC Input: 120VAC, 60Hz Output: 6 Volts DC @ 1.25 Amp Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Solid state two color LED indicates stage of charger. Spark proof. Reverse polarity protected. 12' output cord. Safety timer: 72 hrs. Listed in California Appliance Efficiency Database Agency Approvals: UL / CSA / BC / FCC 5 year warranty  

Article code: v.nr.1115400023

Becker Europa transistor device as a typical retrofit device for later installation in the Mercedes Benz 190 SL with English labeling.For those who don't like tube devices, this is an interesting alternative.Bezel and buttons have the typical 190SL design.Device mono with FM, MW, LW, KW, quick selection buttons. Frequency band VHF 88-103 Mhz.The output power is 7 watts - 4 ohms.Delivery includes assembly set, installation and operating instructions.Completely restored original device (optically and technically).  On request, we can supply the appropriate adapter cable for MP3, iPod, Discman, etc. (surcharge of EUR 22.00).If you wish, we can assign FM to all buttons on this device (no extra charge), please note this under "Special requests" when ordering.At an additional cost we fit a suitable adapter cable to connect a walk-, discman, MP3, or iPod (+ 45.00).Upon request, we also deliver all buttons with FM (cost-free).  Delivery times for radios: The restoration of the ordered radios starts after payment is received. We guarantee that the set matches optically and technically as shown on the picture. Also new sets which are coming out of old stock has to be technically overhauled because of age. The handling time is typically 6 weeks.             

The Middle prong in the picture is a plastic seperator that prevents the 2 wires from touching when plugged in.Article code: v.nr.0015450809

New Tail Light Reflector fits Late Style Ponton and 190sl Will not fit an Early Style 190Sl or Ponton